| Prod. No. | 107431A | 107431B | 107431C | 107431D | 107431E |
| Size .(Max.)O.D (mm) | 32 | 50 | 75 | 100 | 150 |
| Term od O.D | 2.0 D | 1.5 D | 2.0 D | 2.0 D | 2.0 D |
| Min.Wall Thickness (mm) | 1.2 | 2.0 | 2.0 | 2.5 | 3.0 |
| Bending Radius (mm,) | 20 - 120 | 24 - 300 | 30 - 400 | 38 - 500 | 126 -600 |
| Bending degree | 5A° - 180A° | 5A° - 180A° | 5A° - 180A° | 5A° - 180A° | 5A° - 180A° |
| Length Mandrel (mm) | 1000 | 1200 | 1200 | 2000 | 2000 |
| Motor power/HP III Phase | 3.0 | 3.0 | 5.0 | 7.5 | 7.5 |
| Aprox. Wt. (Tons) | 1.300 | 2.300 | 3.000 | 4.500 | 8.500 |
| Motor power/HP III Phase | 3.0 | 3.0 | 5.0 | 7.5 | 7.5 |
| Single Axis NC Control W/ o Dies (Lacs) | 13.72 | 15.50 | 21.42 | 30.95 | 51.43 |
| Single Axis NC Control with Linear W/ o Dies | 15.72 | 17.50 | 23.92 | 33.95 | 55.43 |
| Single Axis NC Control With Servo Linear W/ o Dies | 22.22 | 24.00 | 30.92 | 41.95 | 63.00 |
| 3 Axis NC Control with Servo Linear & Indexing W/o Dies | 28.87 | 30.65 | 38.67 | 51.45 | 73.79 |
| Mandrel Length Extra Cost P/Mtrs.0.47 0.55 0.63 0.79 0.94 | 0.47 | 0.55 | 0.63 | 0.79 | 0.94 |
